Networking

Click [System] → [Server Settings] → [Networking].
Make necessary changes then scroll down and click [Save].

Proxy Server

Item	Description
Use Proxy Server	Specify whether or not to use a proxy server. The default is [Off].
Proxy Server Address	Enter the address of the proxy server.
Proxy Server Port Number	Enter the port number of the proxy server.
Use Authentication	Specify whether or not to apply user authentication on the proxy server. The default is [Off].
User Name	Enter the user name to authenticate the proxy server.
Password	Enter the password to authenticate the proxy server.
Domain Name	Enter the domain name you want to use for authentication of the proxy server.
Check Connection	Test the connection using the proxy server.

Use SSL/TLS

Item	Description
Use SSL/TLS	Specify whether or not to use the SSL port.
SSL Port	Configure the SSL port.
Certificate	[Disable HTTP]: Select this check box to disable HTTP. [Create CSR] button: Click to open the dialog box to enter [Server Name], [Organization], [State or Province], [Organizational Unit], [City or Locality], and [Country Code]. [Install Certificate] button: Select the setting for [Certificate Type] from [Intermediate CA] or [SSL]. Click the [Browse...] button to select the certificate. When you select [SSL] and CSR has not been created, a full certificate including the private key is installed. Enter the password to access the private key in [Full Certificate Password]. For details about the procedure for enabling an SSL connection, refer to Enable SSL.
SSL Client	To trust all certificates while operating the system, select the [Trust All Certificates] check box.

Mail Server

This list is populated from the configured mail servers in [System] ® [Mail Servers].

Choose a Mail Server that has been previously defined in the Mail Servers screen. This Mail Server will be used as the primary mail server that will be used to send system emails. Note that IMAP and POP3 configurations are not listed here.

System Alert Notification

Item	Description
System Alert Notification	Specify whether or not to enable system notifications.
Trigger	Specify whether or not to enable system notifications for the following events. HDD Capacity is Full DB Capacity is Full System Errors Audit Log Failure Delegation Server Communication Error Notification: When selecting this trigger, specify the notification interval in minutes. To receive a notification on expired maintenance and licensing, specify an e-mail address in [Maintenance and Support Email] below.
Input Email Address Manually	Enter the e-mail address of the destination manually. Notify Address: Enter the e-mail address. Language: Select the language to use in the notification e-mail.
Select Destination	Select from the destinations registered to [System] → [Notification] → [Destinations].

Maintenance and Support Email

Item	Description
Input Email Address Manually	Enter the e-mail address to which the notification about licensing is to be sent. If the license is about to expire, and email will be sent to the email addresses you enter. The email will be sent when the license will expire in 90 days, 60 days, 30 days, 15 days, and on the date or expiry (considered 0 days). If more than 0 days left the email wording is: "Your SLNX Vx Maintenance and Support will expire on [date]. Please contact your local sales representative to purchase additional support." If the license has expired (0 days left), the email wording is " Your SLNX Vx Maintenance and Support has expired. Please contact your local sales representative to purchase additional support." [Notify Address] Enter the e-mail address. [Language] Select a language used in notification e-mail.
Select Destination	Select a notification destination from e-mail addresses registered in [System] → [Notification] → [Destinations].

Item

Description

Input Email Address Manually

Enter the e-mail address to which the notification about licensing is to be sent. If the license is about to expire, and email will be sent to the email addresses you enter. The email will be sent when the license will expire in 90 days, 60 days, 30 days, 15 days, and on the date or expiry (considered 0 days).

If more than 0 days left the email wording is: "Your SLNX Vx Maintenance and Support will expire on [date]. Please contact your local sales representative to purchase additional support."

If the license has expired (0 days left), the email wording is " Your SLNX Vx Maintenance and Support has expired. Please contact your local sales representative to purchase additional support."

[Notify Address] Enter the e-mail address.
[Language] Select a language used in notification e-mail.

Select Destination

Select a notification destination from e-mail addresses registered in [System] → [Notification] → [Destinations].

Protocol used for file transfer

Item	Description
Protocol priority	Select from the following HTTP/FTP protocols to use for communicating with devices: HTTP(S) Only: HTTP(S) is used for communicating with devices. If the device does not support HTTP(S) interface, the communication is canceled. FTP/SFTP: Only FTP/SFTP is used for communicating with devices. The behavior can be specified with [FTP/SFTP] below. HTTP(S) Priority: HTTP(S) is used for communicating with devices. If the device does not support HTTP(S) interface or HTTP(S) communication fails, FTP/ SFTP is used instead. HTTP(S) is only supported by devices with ACT 2.0 enabled.
FTP/SFTP	Select from the following FTP/SFTP protocols to use for communicating with devices: FTP SFTP SFTP Priority This setting is available only when [Protocol priority] is set to [HTTP(S) Priority] or [FTP/SFTP]. Before selecting [SFTP] or [SFTP Priority], enable SFTP on the device with Web Image Monitor.
SFTP Port	Enter the port number to use when selecting [SFTP] or [SFTP Priority]. The default is 22.

Item

Description

Protocol priority

Select from the following HTTP/FTP protocols to use for communicating with devices:

HTTP(S) Only: HTTP(S) is used for communicating with devices. If the device does not support HTTP(S) interface, the communication is canceled.
FTP/SFTP: Only FTP/SFTP is used for communicating with devices. The behavior can be specified with [FTP/SFTP] below.
HTTP(S) Priority: HTTP(S) is used for communicating with devices. If the device does not support HTTP(S) interface or HTTP(S) communication fails, FTP/ SFTP is used instead.

HTTP(S) is only supported by devices with ACT 2.0 enabled.

FTP/SFTP

Select from the following FTP/SFTP protocols to use for communicating with devices:

FTP
SFTP
SFTP Priority

This setting is available only when [Protocol priority] is set to [HTTP(S) Priority] or [FTP/SFTP].

Before selecting [SFTP] or [SFTP Priority], enable SFTP on the device with Web Image Monitor.

SFTP Port

Enter the port number to use when selecting [SFTP] or [SFTP Priority].

The default is 22.