SNMP

Quick Configuration

Setting Item

Description

Enable Quick Configuration

Enables Quick Configuration for SNMP Profile.

  • Profile Name: Select the SNMP profile created in [Access Accounts].

  • Restrict access to SLNX: Allows only the system to be the destination of communication via SNMP from devices.

  • Enable SNMP Traps for SLNX: Enables the system to receive SNMP Traps from devices.

  • Clear other settings: Initializes SNMP and other settings specified on the device.

Advanced Configuration

Setting Item

Description

SNMP Profile

Enables the Advanced Settings for SNMP Profile.

  • Profile Name: Select the SNMP profile created in [Access Accounts].

  • SNMP v1/v2: The Community Name specified in the SNMP account setting is displayed. Select the Community number to assign the settings

  • SNMP v3: The Authentication Algorithm specified in the SNMP account is displayed.

  • SNMP Trap: Specify whether or not to enable SNMP trap.

SNMP V3

Enables the SNMP V3 setting.

  • SNMP V3: Specify whether or not to enable SNMP V3 on the device.

  • Authentication Algorithm: Select the authentication algorithm from the following:

    • SHA1

    • MD5

    • SHA224

    • SHA256

    • SHA384

    • SHA512

  • When the SNMP v3 profile is configured in [Profile Name] in [SNMP Profile], [Authentication Algorithm] is set automatically according to the values configured in [Discovery & Polling] → [Access Profiles] → [SNMP].

Encryption Algorithm

Select the encryption algorithm from [DES] or [AES128]. When the SNMPv3 profile is configured in [Profile Name] in [SNMP Profile], the [Encryption Algorithm] is set automatically according to the values configured in [Discovery & Polling] → [Access Profiles] → [SNMP].

  • Permit SNMPv3 Communication: Select whether to always encrypt the data.

    • [Encryption Only]

      The data is always encrypted. When the device cannot encrypt the data, communication is canceled and recorded as an error.

    • [Encryption/Cleartext].

      The data is encrypted according to the user settings. When the device cannot encrypt the data, communication is performed without encryption.

  • SNMP V3 Trap Communication: Set the SNMP v3 Trap Communication to [Active] or [Inactive]. When [SNMP Trap] is enabled in [SNMP Profile], this option is fixed to [Active] and cannot be changed.

Encryption Algorithm

Account Name(User): Specify the account name to be used for SNMPv3 communication.

Authentication Password(User): Specify the authentication password to be used for SNMPv3 communication.

Encryption Password(User): Specify the encryption password to be used for SNMPv3 communication.

Access Type(User): Specify the MIB access type for the specified account.

Advanced Configuration:Community 1–10

  • Community Name: Enter the community name.

  • Access Type: Select an Access Type from [Not Accessible], [read-only], [read- write], or [trap].

  • Protocol Type: Select a Protocol Type from [TCP/IP+IPX], [IPX], [TCP/IP], or [Off].

  • IP Address: Enter the IP address to allow connection in the TCP/IP protocol. An SNMP Trap is sent to the entered IP address when [trap] is selected for Access Type.

  • Manager IPX Address: Enter the IP address to allow connection in the IPX protocol. An SNMP Trap is sent to the entered IP address when [trap] is selected for Access Type.