System Information and Settings

You can view and configure the following settings in [System] → [Server Settings] → [System Information and Settings].

System Information
Server Settings
Security Connection Keys settings
Server Encryption Settings
Debug Log Settings
Debug Log Download
@Remote Center RC gate ID Registration

System Information

You can find the following information:

System version
Build Number
Build Date
Number of registered Devices
Number of registered Groups
Number of registered Maps

Server Settings

Specify whether to use the advanced function related to device settings.

Item	Description
Enable SDK/J Platform installed in the devices	Specify whether to enable or disable SDK/J Platform in the devices. When this setting item is enabled, SDK/J Platform is automatically enabled in devices when Other Polling tasks, Embedded Application, and SDK/J Platform tasks are executed.
Enable SLNX Management Extension for Configuration Templates	When this setting item is enabled, you can configure items indicated with the dagger mark (†) on the device settings template. For details about the setting items, refer to Device-specific Preference Setting Items. Enable this setting at the time of RICOH Streamline NX application installation so you can simultaneously install the [SLNX Management Extension] application to the devices.
Enable SLNX Management Extension for DOSS checking	When this setting item is enabled, you can obtain DOSS-related properties by executing an Other Polling task.

Item

Description

Enable SDK/J Platform installed in the devices

Specify whether to enable or disable SDK/J Platform in the devices. When this setting item is enabled, SDK/J Platform is automatically enabled in devices when Other Polling tasks, Embedded Application, and SDK/J Platform tasks are executed.

Enable SLNX Management Extension for Configuration Templates

When this setting item is enabled, you can configure items indicated with the dagger mark (†) on the device settings template.

For details about the setting items, refer to Device-specific Preference Setting Items.

Enable this setting at the time of RICOH Streamline NX application installation so you can simultaneously install the [SLNX Management Extension] application to the devices.

Enable SLNX Management Extension for DOSS checking

When this setting item is enabled, you can obtain DOSS-related properties by executing an Other Polling task.

To ensure normal operation of the SLNX Management Extension, one of the following versions of the SDK/J Platform must be met:

4.05 or above
5.02 or above
6.00 or above
7.00 or above
10.00 or above
11.00 or above
12.00 or above

Security Connection Keys settings

Enable or disable "Allow Old Security Connection Keys"

Server Encryption Settings

[Server Encryption Settings] is not displayed when newly installing RICOH Streamline NX.

Item	Description
Disable Blowfish	This option is displayed when upgrading Core Server from a previous version to 3.2 or later. When all components of RICOH Streamline NX used on your network are upgraded to version 3.2 or later, select this check box to disable Blowfish and enable AES encryption only. The process is irreversible.
Disable Blowfish for Capture	Select this check box to use AES instead of Blowfish to encrypt the data scanned and processed on the RICOH Streamline NX system. if the Precautions about Blowfish encryption check box is pre-selected, it cannot be changed when: [Disable Blowfish] in the [Capture] tab in [System][Server Settings][Delegation Server Settings] has been selected in the version before upgrade installation The [Disable Blowfish] and [Disable AES 128] check boxes are selected
Disable AES 128	This option is displayed when upgrading Core Server from version 3.6.x or earlier. When all components of RICOH Streamline NX used on your network are upgraded to version 3.7 or later, select this check box to disable AES128 and enable AES256 encryption only. The process is irreversible. The RICOH Streamline NX version 3.7 or later clients encrypt data with AES256. All components of older system should be upgraded in the following priority: The Core server Delegation servers MIE servers, RICOH Streamline NX PC Clients RICOH Streamline NX Embedded Applications

Item

Description

Disable Blowfish

This option is displayed when upgrading Core Server from a previous version to 3.2 or later. When all components of RICOH Streamline NX used on your network are upgraded to version 3.2 or later, select this check box to disable Blowfish and enable AES encryption only. The process is irreversible.

Disable Blowfish for Capture

Select this check box to use AES instead of Blowfish to encrypt the data scanned and processed on the RICOH Streamline NX system.

if the Precautions about Blowfish encryption check box is pre-selected, it cannot be changed when:

[Disable Blowfish] in the [Capture] tab in [System][Server Settings][Delegation Server Settings] has been selected in the version before upgrade installation
The [Disable Blowfish] and [Disable AES 128] check boxes are selected

Disable AES 128

This option is displayed when upgrading Core Server from version 3.6.x or earlier.

When all components of RICOH Streamline NX used on your network are upgraded to version 3.7 or later, select this check box to disable AES128 and enable AES256 encryption only. The process is irreversible.

The RICOH Streamline NX version 3.7 or later clients encrypt data with AES256. All components of older system should be upgraded in the following priority: The Core server Delegation servers MIE servers, RICOH Streamline NX PC Clients RICOH Streamline NX Embedded Applications

Precautions about Blowfish encryption

In RICOH Streamline NX version 3.2 or earlier, only Blowfish encryption is available for the scanning function.

If there is any component which does not support AES encryption in the environment, an error may occur.

When the versions of the RICOH Streamline NX Server and RICOH Streamline NX Embedded Application are different, see the table below:

		RICOH Streamline NX Embedded Application version
		V3.2 or lower	V3.3 or later
RICOH Streamline NX Server version and [Disable Blowfish] configuration	V3.2 or lower	Blowfish encryption enabled	Blowfish encryption enabled
	V3.3 or later and [Disable Blowfish] check box not selected	Blowfish encryption enabled	Blowfish encryption enabled
	V3.3 or later and [Disable Blowfish] check box selected	Encryption fails. An error may occur.	AES encryption enabled

Debug Log Settings

Configure the debug log of the Delegation Server the Core Server, and the MIE Server. You can add or delete the category of a log and change the level.

Item	Description
Maximum File Size	Specify the maximum size of each trace log file in the range of 5 to 100 MB.
Maximum Backups	Specify the maximum number of backup trace log files to be stored in the range of 5 to 100.
Enable Syslog	Select this check box to enable syslog logging. When enabled, specify the following: Host Name: Specify the host name of the syslog server. Protocol: Specify the protocol to be used when connecting to the syslog server from [UDP] or [TCP]. Port: Specify the port to connect to the syslog server. SSL: This setting is available only when [Protocol] is set to [TCP]. Select this check box to use SSL when connecting to the syslog server. Facility: Specify the Facility to be used when connecting to the syslog server. Include Notification Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive Notification Log created in the Core Server. Include Audit Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive Audit Log created in the Core Server. Include System Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive System Log created in the Core Server. Include Authentication Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive Authentication Log created in the Core Server.

Item

Description

Maximum File Size

Specify the maximum size of each trace log file in the range of 5 to 100 MB.

Maximum Backups

Specify the maximum number of backup trace log files to be stored in the range of 5 to 100.

Enable Syslog

Select this check box to enable syslog logging. When enabled, specify the following:

Host Name: Specify the host name of the syslog server.

Protocol: Specify the protocol to be used when connecting to the syslog server from [UDP] or [TCP].

Port: Specify the port to connect to the syslog server.
SSL: This setting is available only when [Protocol] is set to [TCP]. Select this check box to use SSL when connecting to the syslog server.
Facility: Specify the Facility to be used when connecting to the syslog server.
Include Notification Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive Notification Log created in the Core Server.
Include Audit Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive Audit Log created in the Core Server.
Include System Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive System Log created in the Core Server.
Include Authentication Log: This setting is available when the [Core Server] is selected for [Debug Log Settings]. Select this check box to receive Authentication Log created in the Core Server.

Debug Log Download

Specify the source for the log download:

[SLNX Device]
[MIE Intranet Extender server]
[Delegation Server]
[PC Client]

Add one or more servers or groups to the Target on the right.
- If you selected SLNX Device as the source, you have the option to Download Device LogTrace, limited to a custom date range. This will gather details about the selected Ricoh devices that have the DM Agent installed only.
- If you selected Delegation Server, Exclude Rx Inst Logs and Exclude Rx Conf Logs are disabled. Uncheck one or both option to include these details instead. However, these are disabled by default because the directories are very large and do not include substantial useful data for this purpose.
Click [Initiate Download]. Click [OK] to close the window.
Click [View Downloads].

The View Downloads screen shows all logs available to download.

If you right-clicked on a device in the Device List and chose the Device LogTrace Download option from the menu, an initiated download appears here in this screen.
In the View Downloads screen, enable the checkbox for one or more logs, and then click Download. Note if the log is still processing for any chosen log, the Download button will not be available. Once the Status column changes to the Ready icon, you can proceed to download the log.

This action is traced and appears in the Audit log and in the Audit log Status Report.

@Remote Center RC gate ID Registration

You can register [RC Gate ID] of [RICOH @Remote Connector NX] when operating [RICOH @Remote Connector NX] and [RICOH Streamline NX] at the same time.

After [RC gate ID] is registered, [RICOH @Remote Connector NX] can send the device information stored in [RICOH Streamline NX] to the @Remote center to reduce the network load at device discovery.