Create a Shared Connector

Although a destination connector or process connector can be configured each time it is added to the delivery workflow, those connectors can be configured as the shared connectors at the system level and used as the shared settings to simplify the configuration process of a workflow.

When a destination connector or process connector is added to the delivery workflow, the administrator can select and add either a local connector that is not preset or a shared connector.

 

To Create a New Shared Connector

To create a new shared connector based on an existing shared connector, refer to Edit a Shared Connector.

  1. Click [Workflow] → [Shared Connector].

  1. Click (Add).

  2. Enter the shared connector name in [Shared Connector Name].

  3. Enter the shared connector description in [Description].

  4. Select the category of the connector from the [Connector Category] drop-down list.

  5. Select the job processing location from the [Location] drop-down list.

  6. Select the type of the connector from the [Connector Type] drop-down list.

  7. Click [OK].

  8. On the [Settings] tab, configure the properties according to the type of the selected shared connector.

For details about configuring the properties of the connectors, refer to Configure the Destination Connector Properties and Configuring the Process Connector Properties.

  1. On the [Preset] tab, configure the setting items, layout, and display method according to the type of the selected connector.

For details about configuring the settings, refer to Device Operation Screen Customization.

  1. Click (Save).