Specify Web Server Port

This screen appears when configuring any server type.

On the "Web Server" window, specify the port number of the server on which to install the software.

To use SSL to communicate with the server, select the [Use SSL/TLS] check box. The default port numbers are as follows:

Server	When not using SSL	When using SSL	Main application
Core Server	8080	51443	Connect to the Management Console
Delegation Server	9090	52443	Connect from a device
MIE server	10100	53443	Connect to a mobile device
Notification server	10101	54443	Connect from a device with SLNX Embedded Applications installed, SLNX DM Agent, and SLNX PC Client

Notes

• To change the port number of the Delegation Server, specify a port number other than "443". The @Remote function uses port number 443.
• When SSL is not used, only the password is encrypted, and all other information is communicated with plaintext.
• If you are using IIS, the Core Server port will also be used when IIS communicates with the Core Server.
• [On-premise]: If users configure automatic server detection in the mobile application, the application will attempt connection over HTTPS. This means that the client will need to have the required certificates installed to support that connection.
• If you change the port number from the default, you will need to launch the Management Console and connect to the assigned port. After you login for the first time, logout again and restart the server. The Management Console should now launch form the Start menu using the correct port.
• To use a commercial certificate, ensure you select [Use SSL], and then choose the 'Self-signed Certificates or Commercial Certificate Authority in the SSL Server options screen. Refer to Setup SSL Server Options and to "Enabling SSL" in the SLNX Administrator’s Guide.