Configure the Connection Settings between @Remote Center and Delegation Servers

1. Click [@Remote] → [@Remote Settings].

2. In the list, select the server to be connected to @Remote Center.

3. On the [Proxy Server] tab, select [On] in [Use Proxy Server].

4. Specify the IP address and port number of the proxy server.

5. When the proxy server requires authentication, select [On] in [Use Authentication], and specify the user name, password, and domain name. The table below describes all options on the Proxy tab.

   Item	Description
   Use Proxy Server	Specify whether or not to use a proxy server. The default is Off.
   Refer to System Settings	Select this check box when [Use Proxy Server] is set to On to reference the settings of [Server Settings] [Networking]    [Proxy Server].
   Proxy Server Address	Enter the server address when not referencing the [Proxy Server] settings.
   Proxy Server Port Number	Enter the port number when not referencing the [Proxy Server] settings.
   Use Authentication	Specify [On] or [Off] for user authentication.
   User Name	Enter the user name when user authentication is set to [On].
   Password	Enter the password when user authentication is set to [On].
   Domain Name	Enter the domain name when user authentication is turned [On].
   [Check Connection] button	Test the connection using the proxy server.

6. Click [Check Connection] to check that a connection can be established between @Remote Center and Delegation Server via the proxy server.

7. Click (Save).