SNMP

Quick Configuration

Setting Item

Description

Enable Quick Configuration

Enables Quick Configuration for SNMP Profile.

Profile Name

Select the SNMP profile created in [Access Accounts].

Restrict access to SLNX

Allows only the system to be the destination of communication via SNMP from devices.

Enable SNMP Traps for SLNX

Enables the system to receive SNMP Traps from devices.

Clear other settings

Initializes SNMP and other settings specified on the device.

Advanced Configuration

Setting Item

Description

SNMP Profile

Enables the Advanced Settings for SNMP Profile.

Profile Name

Select the SNMP profile created in [Access Accounts].

SNMP v1/v2

The Community Name specified in the SNMP account setting is displayed. Select the Community number to assign the settings

SNMP v3

The Authentication Algorithm specified in the SNMP account is displayed.

SNMP Trap

Specify whether or not to enable SNMP trap.

SNMP V3

Enables the SNMP V3 setting.

SNMP V3

Specify whether or not to enable SNMP V3 on the device.

Authentication Algorithm

Select the authentication algorithm from the following:

  • SHA1

  • MD5

  • SHA224

  • SHA256

  • SHA384

  • SHA512

When the SNMP v3 profile is configured in [Profile Name] in [SNMP Profile], [Authentication Algorithm] is set automatically according to the values configured in [Discovery & Polling] → [Access Profiles] → [SNMP].

Encryption Algorithm

Select the encryption algorithm from [DES] or [AES128]. When the SNMPv3 profile is configured in [Profile Name] in [SNMP Profile], the [Encryption Algorithm] is set automatically according to the values configured in [Discovery & Polling] → [Access Profiles] → [SNMP].

Permit SNMPv3 Communication

Select whether to always encrypt the data.

  • [Encryption Only]

    The data is always encrypted. When the device cannot encrypt the data, communication is canceled and recorded as an error.

  • [Encryption/Cleartext].

    The data is encrypted according to the user settings. When the device cannot encrypt the data, communication is performed without encryption.

SNMP V3 Trap Communication

Set the SNMP v3 Trap Communication to [Active] or [Inactive].

When [SNMP Trap] is enabled in [SNMP Profile], this option is fixed to [Active] and cannot be changed.

Encryption Algorithm

Account Name(User)

Specify the account name to be used for SNMPv3 communication.

Authentication Password(User)

Specify the authentication password to be used for SNMPv3 communication.

Encryption Password(User)

Specify the encryption password to be used for SNMPv3 communication.

Access Type(User)

Specify the MIB access type for the specified account.

Advanced Configuration:Community 1–10

  • Community Name

    Enter the community name.

  • Access Type

    Select an Access Type from [Not Accessible], [read-only], [read- write], or [trap].

  • Protocol Type

    Select a Protocol Type from [TCP/IP+IPX], [IPX], [TCP/IP], or [Off].

  • IP Address

    Enter the IP address to allow connection in the TCP/IP protocol. An SNMP Trap is sent to the entered IP address when [trap] is selected for Access Type.

  • Manager IPX Address

    Enter the IP address to allow connection in the IPX protocol. An SNMP Trap is sent to the entered IP address when [trap] is selected for Access Type.