Printer

[Off], [Level 1], [Level 2]

Specify whether to use the Misfeed Recovery function.

Specify whether to print a report when an error occurs.

Select the time period the machine waits before continuing printing when there is no paper matching the size and type specified by the printer driver in the paper trays: [Off], [Immediate], [1 min.], [5 min.], [10 min.], [15 min.]

Select the action to perform in the event of a memory overflow.

[Do not Print], [Error Information]

Specify whether to separate jobs.

Specify whether to automatically delete temporarily stored documents. When using Device Secure Print, Hold Print jobs are deleted automatically according to this setting.

Enter the period (1 to 200 hours) after which temporarily stored documents are deleted.

Specify whether to delete saved documents automatically. When using Device Secure Print, Stored Print jobs are deleted automatically according to this setting.

Enter the period (1 to 180 days) after which saved documents are deleted.

Select [Complete List] or [List per User ID] by User ID for Initial Print Job List.

Specify whether to perform 180-Degree Rotation printing.

Specify whether to print incoming compressed job data after decompressing it on the printer.

The only supported compression format is GZIP.

Select [Font Priority] or [Frame Priority] for memory usage.

Select [Off] to disable duplex printing. To enable duplex printing, select either [Long Edge Feed] or [Short Edge Feed] as the binding orientation.

Enter the default number of copies using single-byte numbers. Enter a number from 1 to 999.

Specify whether to print blank pages.

Specify whether to use the Black and White Image Recognition function. Off, On, Per page, Per job

Specify whether to enable Edge smoothing.

If you select [On], rough edges of letters or figures will be smoothed before printing.

Specify whether to enable Toner saving.

If you select [On], toner is saved by reducing the number of dots in solid black areas of print.

Specify whether to perform Spool Image printing.

Select a wait time:

[Long Wait], [Medium Wait], [Short Wait], [In Reserved Job Order]

Enter the printer language to be used.

[Off], [Auto]

Select the default paper size.

Specify whether to perform letterhead paper printing: [Off], [Auto Detect], [On (Always)]

Specify whether to use the Edge to Edge Print function.

If the bypass tray is used, specify whether to follow the printer driver or the command setting or device setting.

Enter the default printer language.

Specify whether to search for another paper tray if the paper size or type specified for the job does not match the paper in the tray specified for printing.

Specify whether to use the sort function. To use the sort function, select a sort method:

[Collate], [Rotating Collate], [Shift Collate]

Specify whether to use the staple function. To use the staple function, select a staple position:

[Off], [Top Left Slant], [Top Right Slant], [Left 2], [Top 2], [Right 2], [Top Left], [Top Right], [Center]

Specify whether to use the punch function. To use the punch function, select the punching method and position:

[Off], [Left 2], [Top 2], [Right 2], [Left 3], [Top 3], [Right 3],

[Left 4], [Top 4], [Right 4]

If paper runs out during printing, the tray will be switched automatically if there is another tray that is loaded with paper of the required size, orientation, and type.

Select a receive buffer size:

[16 KB], [32 KB], [64 KB], [128 KB], [256 KB], [512 KB],

[1 MB]

PCL

Select either [Portrait] or [Landscape].

Enter the number of lines per page (5 to 128).

Select a font source:

[Resident], [RAM], [HDD], [Slot DIMM], [SD], [SD Font

Download]

Enter the default font ID.

Enter the default font size in points.

Enter the default font pitch in points.

Select the character set to be used for the default font.

Select either [Regular] or [Dark] for the Courier font type.

Specify whether to use the Extend A4 Width function.

Specify whether to use the Append CR to LF function.

Select a resolution:

[300 dpi], [600 dpi Fast], [600 dpi Standard], [1200 dpi]

You can use parameter settings to control tray switching. If settings are not needed, leave the space blank.

[Auto Select], [Tray 1], [Tray 2], [Tray 3], [Tray 4], [Tray 5], [Tray 6], [Tray 7], [Large Capacity Tray], [Bypass Tray]

PostScript

Specify the time the machine waits for a currently printing job that has stalled before canceling the job.

Enter a value of up to 999 seconds.

Specify the time that the machine waits for a job before canceling the job. Enter a value of up to 999 seconds.

Select either [Binary Data] or [TBCP] for the data format.

Select a resolution from the following:

[300 dpi], [600 dpi Fast], [600 dpi Standard], [1200 dpi]

Select an RGB color quality: [None], [Fine], [Super Fine]

Select a color profile:

[Auto], [Presentation], [Solid Color], [Photographic], [User Setting]

Select [Color] or [Black & White].

Specify whether or not the machine automatically detects the image orientation (Portrait/Landscape) of the job data it receives.

To enable auto detection of orientation, select [On].

Trays can be made to switch under parameters settings. Up to three parameters can be set for each tray. If settings are not needed, leave the space blank.

[Auto Select], [Tray 1], [Tray 2], [Tray 3], [Tray 4], [Tray 5], [Tray 6], [Tray 7], [Large Capacity Tray], [Bypass Tray]

PDF

Select a resolution from the following:

[300 dpi], [600 dpi Fast], [600 dpi Standard], [1200 dpi]

Select an RGB color quality from the following: [None], [Fine], [Super Fine]

Select a color profile from the following:

[Auto], [Presentation], [Solid Color], [Photographic], [User Setting]

Select [Color] or [Black & White].

Specify whether or not the machine automatically detects the image orientation (Portrait/Landscape) of the job data it receives.

To enable auto detection of orientation, select [On].

Enter a new PDF password.