Network Protocols

Here are the groups of settings you can find on this node.

 

IPv4 protocols

Setting Item

Description

SMB

Specify whether to enable SMB.

Workgroup Name

Enter the Workgroup name.

Notify Print Completion

Specify whether to enable Print Completion Notification.

Enable Telnet

Specify whether to enable printing using Telnet.

Enable Bonjour

Specify whether to enable Bonjour.

Enable SSL

Specify whether to enable SSL.

Enable SSDP

Specify whether to enable SSDP.

Enable BMLinkS

Specify whether to enable BMLinkS.

Enable SSH

Specify whether to enable SSH.

Enable SFTP

Specify whether to enable SFTP.

Enable FTP

Specify whether to enable FTP.

Enable IPDS

Specify whether to enable IPDS.

Enable RHPP

Specify whether to enable RHPP.

Enable WS-Device

Specify whether to enable WS-Device.

Enable WS-Printer

Specify whether to enable WS-Printer.

Enable WS-Scanner

Specify whether to enable WS-Scanner.

Enable LPR

Specify whether to enable LPR.

Enable RSH

Specify whether to enable RSH.

Enable DIPRINT

Specify whether to enable DIPRINT.

Enable IPP

Specify whether to enable IPP.

Enable CBC

Specify whether to enable CBC.

Enable FTP for RFU

Specify whether to enable FTP for RFU.

Enable @Remote Interface

Specify whether to enable @Remote Interface.

 

IPv6 protocols

Setting Item

Description

Enable Telnet

Specify whether to enable printing using Telnet.

Enable Bonjour

Specify whether to enable Bonjour.

Enable SSL

Specify whether to enable SSL.

Enable SFTP

Specify whether to enable SFTP.

Enable RHPP

Specify whether to enable RHPP.

Enable WS-Device

Specify whether to enable WS-Device.

Enable FTP for RFU

Specify whether to enable FTP for RFU.

 

SSL Options

Setting Item

Description

SSL/TLS Version

Specify whether to enable SSL/TLS by version.

Encryption Strength Setting

Specify encryption strength.

Below 128 bit (SSL Suite)

Specify whether to enable the settings below 128 bits on the SSL/TLS communications to or from the VM. This setting is available only for 2014 or earlier models.

The following conditions should be met so that the configuration is evaluated as "valid" to prevent vulnerability in security:

  • One or more items of [SSL/TLS Version] are enabled.
  • One or more items of [Encryption Strength Setting] other than "RC4 128 bit" are selected.
  • One or more items of [SSL/TLS Version] other than [SSL 3.0] should be enabled when "AES 128 bit" or "AES 256 bit" is selected.

The following SSL settings in Web Image Monitor must be consistent so that SSL functions properly. For details about using Web Image Monitor, see the operation manual of the machine.

  • [Device Management] → [Configuration] → [Extended Feature Settings] → [Administrator Tools] → [Select Available Functions]
  • [Device Management] → [Configuration] → [Security] → [SSL/TLS]

 

Other Protocols

Setting Item

Description

AppleTalk

Specify whether to enable the AppleTalk protocol.

Zone Name

Specify the AppleTalk zone. Enter the zone name.

NetWare

Specify whether to enable the NetWare protocol.

Extended Security

  • [Disable Internal Communication Port] Specify whether to disable the Internal

    Communication port, which is a service port on the device, for security reasons. For details, contact your RICOH service representative.

  • [Disable Control Panel Recovery Port]

    Specify whether to disable the Control Panel Recovery port, which is a service port on the device, for security reasons. For details, contact your RICOH service representative.